Trouble-free accuracy with proven magnetostrictive probe technology
Highly accurate, trouble-free performance for inventory
management and in-tank leak detection. Unlike
competitive probes that have to be upgraded to handle
different liquids, the 924B probe comes standard in
stainless steel and can be used with most petroleum
products. The probe also measures water level,
providing information to ensure product quality.
30-3221-1Liquid Only.
The Single
Level Sump
Sensor is
designed to
detect the
presence of
liquid in sumps, dispenser pans and other locations
where the presence of a liquid could indicate that a
leak has occurred. If there is a break in the cable, the
alarm will be activated by the system.
30-3221-1A, 30-3221-1B
The Liquid Only
Interstitial Sensor is used
primarily in the
interstitial area of doublewall
tanks. The sensor
contains a float switch
that activates in the presence of
liquid. Тhe 30-3221-1A is constructed from a
chemically resistive non-metallic material, and the 30-3221-1B
is constructed of brass.
30-3219-12 Fuel
The Fuel Sump Sensor is
designed to detect the presence
of liquid hydrocarbons in
sumps, dispenser pans and other
locations where the presence of
a hydrocarbon liquid could
indicate that a
leak has
occurred. In the event of a cable break, the
system will activate the alarm.
30-3223 Liquid Only
The Liquid Only
Interstitial Sensor is used
primarily to monitor the
interstitial area of doublewall
tanks. This sensor can
also be used in sumps,
dispenser
pans and
other locations where the presence of a
liquid could indicate that a leak has
occurred.
30-3224
Combination Single Level
Fuel/Water. It is designed to
detect the presence of liquid
hydrocarbons and water in
sumps, dispenser pans and other
locations where the presence of
a liquid could indicate that a leak
has
occurred. A simple
float switch is clamped onto the fuel
sensor which can be positioned at any
height to activate in the presence of a
liquid.
30-3207-06, 30-3207-10,
30-3207-15.The Fuel
Monitoring Well Sensor is
used primarily in
monitoring wells with
fluctuating ground water
tables. This sensor can also
be placed in the
containment areas of tanks, pumps
and pipes. It will alert the system if
any fuel enters the containment area,
which would indicate a leak. In the
event of a cable break, the system will
activate the alarm.
30-3206 Fuel / Water Interstitial
Sensor is designed for use in the
interstitial area of a double-wall
tank. This sensor is easily
installed to discriminate between
fuel and water. The system will
also activate an alarm in the event
of a break in the cable.
30-3210-06, 30-3210-15 and 30-3210-20
Fuel/Water. The
Fuel/Water Monitoring
Well Sensor contains all
of the features mentioned
above, as well as the
ability to detect water. This sensor has the
ability to discriminate between
hydrocarbon liquid and water.
30-3221-2 Dual Level
Hydrostatic Interstitial Sensor
is designed for use in the brinefilled
reservoir of the
interstitial area of a doublewall
tank. This sensor contains
a dual level float switch that
detects level
changes of
fluid in the
reservoir of
the tank. The alarm will also activate in
the event of a break in the cable.
30-3222 Fuel Vapor Sensor is
designed to detect hydrocarbon
vapors in monitoring wells and
the interstitial areas of a
doublewall tank. The presence
of these vapors could indicate a
potentially dangerous leak. In
the event
that there is
a break in
the cable,
the system
will activate the alarm.