![]() SCS steam clamps are used in saturated steam and hot water applications. There are a number of physical differences between SCS steam clamps complying with EN 14423 / DIN 2826 and RK safety clamps complying with EN 14420-3 / DIN 2817: - SCS steam clamps are physically larger and longer - SCS steam clamps have deeper inner grove - SCS steam clamps consist of a thicker wall SCS steam clamps complying with EN 14423 / DIN 2826 are assembled using specially-designed steam couplings complying with EN 14423 / DIN 2826. N.B.: Steam is dangerous. EN ISO 6134 forbids the use of quick release couplings in steam applications. Extra care and attention should be taken when choosing the correct hose, fitting and clamping solution. Under no circumstances may SCS steam clamps complying with EN 14423 be replaced by RK safety clamps complying with EN 14420-3 / DIN 2817. Such substitution will result in a dangerous hose assembly. APPLICATION: Assembly of steam and hot water hoses WORKING PRESSURE: 100 bar / 1450 psi TEMPERATURE +210°C/410°F Hose, coupling, assembly method and seal must be chosen in relation with the desired application and temperature |
MATERIAL •SCS steam clamp shells Drop forged brass USA ASTM B16, grade C36000 Germany DIN 17660 grade CuZn36Pb3 UK BS 2847 grade CZ124 Cast stainless steel USA ASTM A666 grade 316 stainless steel Germany DIN 17440 grade1.4401 X5CrNiMo1810 UK BS 970/4 grade 316S16 France NF A35-579 grade Z6CND17.11 •Nuts and Болтове Brass SCS steam clamps: Болтове compl.with EN ISO 4762 / DIN 912, zinc plated 8.8 nuts compl. with EN ISO 4032 / DIN 934, zinc plated 8.8 Stainless steel SCS steamclamps: Болтове complying with EN ISO 4762 / DIN 912, SS A.2 nuts complying with EN ISO 4032 / DIN 934, SS A.2 SCS steam clamps are supplied complete with nuts and Болтове. ASSEMBLY See assembly instructions
|